Need to measure/evaluate a process?
Need a local expert to walk your process?
Questions about a specific technology?
Contact your local expert now!
PROCESS CONTROLLERS
PRODUCTS
- TOTAL SOLUTION PROVIDER | INSTRUMENTATION & ANALYTICAL SOLUTIONS
- /
- TOTAL SOLUTION PROVIDER | CONTROL & AUTOMATION SOLUTIONS
- /
- TOTAL SOLUTION PROVIDER | PROCESS CONTROLLERS
330R
The 330R is a universal process monitor that programs to accept a signal input from a process instrument or temperature sensor, and shows real-time process status on its large display. It features alarm trip outputs that can be used for on/off control or to warn of unwanted high/low process conditions. The 330R is also available with an analog output signal (proportional to input) for retransmission to an analog control system, and with RS-485 communications for interface with digital-communicating DCS, PLC and PC-based SCADA systems.
535
The 535 is a single loop process controller that provides PID control of temperature, pressure, level and flow in batch and continuous process applications. It provides a proportional analog control signal output that is typically used to regulate a control valve or similar final control element. The 535 also features an autotune capability that continually analyzes your process and makes modifications to the tuning parameters to ensure precise, long term and stable control.
FCN-500
The FCN-500 is a dual redundant, configurable controller that ensures critical processes continue without interruption. It features a highly durable design, fan-less cooling, error check and correct (ECC) memory to prevent software failures and contains no IC chips on the backplane, preventing mechanical failures. Rich diagnostic functions make it possible to keep track of CPU temperature, SRAM memory status and I/O module status.
FCN-RTU
The FCN-RTU is a low power consumption model controller that meets the demanding requirements where infrastructure is inadequate and conditions inhospitable. It features a highly durable design, fan-less cooling, error check and correct (ECC) memory to prevent software failures and contains no IC chips on the backplane, preventing mechanical failures. Rich diagnostic functions make it possible to keep track of CPU temperature, SRAM memory status and I/O module status.
FCJ
The FCJ is a brick type, autonomous controller that fulfills the basic requirements of utility control while also providing reliability for SCADA communication with its network redundancy capability. It features a highly durable design, fan-less cooling, error check and correct (ECC) memory to prevent software failures and contains no IC chips on the backplane, preventing mechanical failures. Rich diagnostic functions make it possible to keep track of CPU temperature, SRAM memory status and I/O module status.
MODEL 555
The 555 is a cost effective way to upgrade chlorination and dechlorinatin processes in an easy to use, rugged 1/4 DIN size package. The 555 can easily be set up to handle flow proportional control, residual control, compund loop control with lag times, and dechlorination with sulfer dioxide. The 555 is designed to quickly integrate with your flow transmitters and residual analyzers through straightforward configuration menu selections.
Y-VIEW Human Machine Interface
Y-View is an operator interface that is offered in a variety of sizes from 5.7 to 15 inches. All units are available with color screens and the 5.7-inch unit is also available in monochrome. Y-View HMI supports up to 8 protocols simultaneously and includes a gateway function allowing for the easy movement of points between different systems.
